1·Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.
其他可能的原因包括油泵问题、杆和主轴承的空隙、凸轮轴停止工作、或者凸轮的方位和升降。
2·Remove chain cover for oil pump.
拆下机油泵的链条盖。
3·The oil pump whether was damaged.
油泵是否损坏。
4·Fit timing chain cover on oil pump.
安装机油泵的正时链条罩。
5·Remove the oil pump timing chain cover.
拆下机油泵正时链条盖。
6·The position of the lube oil pump is not suitable.
滑油泵的位置不适当。
7·Starting Motor, Oil Pump Electrical Motor, Armature.
起动电机，油泵电机，电枢。
8·Connect hydraulic nut to oil pump and screw in dial gauge.
将液压螺母与油泵连接并用千分表拧紧。
9·The oil pump is driven by a chain drive on the crankshaft.
机油泵由曲轴上的链条驱动装置来驱动。
10·Two different views show the completed oil pump inlet elbow.
两种不同的意见显示完成油泵入口肘。
1·Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.
其他可能的原因包括油泵问题、杆和主轴承的空隙、凸轮轴停止工作、或者凸轮的方位和升降。
2·Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft end play, or CAM bearings and lifters.
其他可能的原因包括油泵问题，杆和柱轴承之间的空隙，凸轮轴停止工作或者凸轮的方位和升降等。
3·This paper introduces the development and design of the rotor oil pump of 6105 engine .
本论文介绍了对6105汽车发动机转子式机油泵的开发设计。
4·To distribute the oil throughout the engine, oil must be pressurized. this is done with an oil pump.
为了将机油分送到整个发动机，必须对机油加油。这是有机油泵来完成的。
5·Connect hydraulic nut to oil pump and screw in dial gauge.
将液压螺母与油泵连接并用千分表拧紧。